E3330 Wi-Fi6 Wireless Router User Manual
Step 1-Install the Device 2.5GE-WAN/LAN1-1G LAN2 LAN3 RESET MESH WPS POWER Connect to the WAN port If an Internet access device (modem or optical fiber modem) is available, connect the network cable the LAN port of the modem. Power Outlet Uplink CPE Access Alternative Network Cable Jack If no Internet access device is available, connect the network cable to the broadband network port on the wall.
Step 2-Add the Router Download and install ZLife Lite. For iOS, download ZLife Lite on App Store. For Android, download it on Google Play. Tap Add device.
Tap Wi-Fi Router. Connect the WAN port of the router to the broadband port. Tap Next.
Scan the QR code found at the bottom of the router. If no QR code is present, enter your wireless account and password. NOTE: If the operating system of your mobile phone is Android, you must connect to Wi-Fi manually after scanning the QR code. If you do not want to enter the password manually, tap copy the password. This operation arises from Android rather than ZLife Lite because of Android security requirements.
After the router is added successfully, the Configure network screen is displayed. Tap Bind immediately. After the router is added successfully, the indicator is green and steady. LED indicator/WPS NOTE: To perform more advanced configurations, go to the web page for router management. For the login address and the default username and password, see the label at the bottom of the router.
Step 3- Set Up a Mesh Network NOTE: Step 3 is required only if you want to deploy multiple E3330 routers. Method 1: Use ZLife Lite app for connection 1. Make sure the router you have just configured is connected to the Internet. 2. After the new router is powered on, follow the instructions given by the app. 3. After the new router is connected to the existing router, the LED of the new router will turn solid blue. Method 2: Use WPS key for connection 1.
Troubleshooting The Power indicator on the front panel is off after the power button is pressed. Power switch does not turn on. The power adapter is not correctly connected to the device. Be sure to use the power adapter supplied with the device. Unable to connect to the network. Check that the Ethernet cable is correctly connected to the WAN interface and the Ethernet cable is correctly connected to the LAN interface.
SJ-20220322181146-001 2022-10-13(R1.
