ZXV10 B820C-A15 Hybrid STB User Guide _______________________________ ZTE CORPORATION ZTE Plaza,Keji Road South,Hi-Tech Industrial Park, Nanshan District,ShenZhen,P.R.China Postcode:518057 Tel: +86-755-26771900 URL: http://support.zte.com.cn E-mail: 800@zte.com.
LEGAL INFORMATION Copyright © 2019 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
Content Chapter 1 Safety Instructions.................................................... 1 Chapter 2 Packing List................................................................4 Chapter 3 Panels......................................................................... 5 3.1 Front Panel..................................................................................................... 5 3.2 Rear Panel......................................................................................................
Chapter 1 Safety Instructions Special Note • Remove the plastic covering before using the STB to provide normal ventilation. • Use the power adapter provided with the STB. Important Safety Instructions • Ensure that the electric voltage meets the device requirements. Check the cables periodically, replace any damaged cables immediately. • To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer servicing to qualified service. • Do not use this apparatus near water.
• The power cable or power socket is damaged. • There is any liquid leaks into the device. • Fails to run normally even after following the instructions. • The device is physically damaged. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RF Exposure Information The Maximum Permissible Exposure (MPE) level is calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with the RF exposure requirement, a separation distance of 20 cm between the device and the human should be maintained.
Chapter Quantity 2 Packing List Item Remarks Set-Top Box (STB) 1 HDMI cable 1 1 Power adapter User Guide 1 1 Qualification Certificate/ WARRANTY Notes: This packing list is for reference only. The items actually delivered depend on the companion packing list of the STB. Contact the provider immediately if parts are missing or damaged. Keep all packaging and available components for return purposes.
Chapter 3 Panels 3.1 Front Panel Key 1 2 Name Description Power switch Press it to turn on/turn off STB. Power indicator Red: STB is in standby state. Green: STB is running normally. Not lit: STB is not powered on.
3.2 Rear Panel Key Name Description 1 RF RF IN interface. 2 SPDIF Digital audio interface, which can be connected to a power amplifier. 3 SD Out Audio and composite video output interface. 4 HDMI HDMI output interface. 5 Ethernet 10 M/100 M Base-T RJ45 self-adaptive Ethernet interface. 6 USB USB interface. 7 DC +12 V Power input socket, +12 V DC power adapter provided. Consult technical personnel before using other types of power adapter.
Chapter 4 Connecting Up 4.1 Connecting Network This section introduces the network connection methods for STB. Select one method to connect according to the on-site conditions. 4.2 Video and Audio Connections Steps Connecting Standard Definition Interface 1. Connect the R and L interfaces on the TV to the corresponding interfaces with the AV cables. 2. Connect the AV interface on STB to video input interface of TV with the AV cable (yellow), as shown in the follow figure.
Connecting High Definition Interface Connect the HDMI interface on STB to the corresponding interface on TV with the HDMI cable, as shown in the follow figure.
4.3 Power ON Steps 1. Ensure that all cables are connected correctly. 2. Install the power cable to STB using the power adapter and to AC power source. 3. Ensure that all other devices are plugged in and receiving power. 4. Turn on the TV. —END OF STEPS— 4.4 Upgrade The STB can connect to the server on each power-on and check whether an upgrade is required. If so, the upgrade starts at once, which normally takes three to five minutes. Do not perform any operations during this period.
Chapter 5 Troubleshooting Problem Possible Cause Solution The indicator is not lit after switching on the STB. The power adapter has not been connected. Connect the power adapter. The power adapter is damaged. Consult the service provider and replace power adapter with a new one. The power outlet has no power. Check and ensure the power outlet has power. The network cable has not been connected properly. Connect the network cable properly or replace it with a new cable.
Problem Possible Cause Solution the volume of the STB or TV. The remote control fails. The remote control is physically damaged. Change a new Bluetooth remote control. The pairing fails. Press and “ VOL - ” at the same time for 3 seconds, start pairing. Other problems Chapter There is no battery in the remote control, or the batteries are installed backwards. Install the batteries correctly. The batteries are dead. Replace the batteries. TV cannot receive instructions from remote control.
Receiving bit rate range: 200 kbps ~ 40 Mbps Resolution: 720 × 576/PAL, 720 × 480/NTSC, 1280 × 720 /720p, 1920 × 1080 /1080i, 1920 × 1080 /1080p, and 3840×2160/4K Audio MPEG-1 Layer 1/2, MPEG-1 Layer3(Optional), AAC, MPEG-2 AAC LC, MPEG-4 AAC LC, HE-AAC v1/v2, wav, wma, PCM, Dolby Digital, and Dolby Digital Plus Surround, Single/Dual/Multi Track, and Stereo Access Mode Supports DHCP, LAN, PPPoE, and WLAN access Supports IEEE 802.11 b/g/n/ac, and IPv4/IPv6 Dimension 148 mm × 100 mm × 31.
