User's Manual

ZTE-C E520 User Manual
37
3. The device will appear in the Bluetooth available devices menu once it has been
located. Highlight the desired device and press the OK Key [Pair].
4. The phone may prompt you for the pass code. Consult the Bluetooth
accessory instruction manual for the correct pass code. Enter the pass code
and press the OK Key. If the phone doesn’t prompt you to input the pass code,
follow the on-screen prompts to continue.
5. Once paired, you will see the device listed in the Bluetooth Device menu.
Managing Bluetooth
Select Menu→Bluetooth→Bluetooth Manager from standby mode. You can
manage the Bluetooth settings below:
 Power: Turn Bluetooth on or off.
 Discovery Mode: Disable or enable the discovery mode. If the discovery mode
is turned on, other devices can find your phone within 3 minutes.
 Device Name: Edit the Bluetooth device name for your phone. This name
will appear on other Bluetooth devices when your phone is located.
 Address: Allows you to view the address of your Bluetooth device.
 Device Type: Allows you to view your Bluetooth device type.
 Support Profiles: Allows you to view a listing of the Bluetooth profiles
supported by your phone, such as HSP, HFP, OPP, A2DP, AVRCP, FTP, etc.