ZTE Blade A210 (BGH Joy A20) User Manual 1
Appearance Light/proximity sensor Front camera Fill light Charging light Earpiece Touch screen Back key Recent apps key Home key 2
USB port Headset jack Back camera Flashlight Volume buttons Power/ Reset/ Lock button Speaker Microphone 3
Inserting a micro-SIM card 1. Remove the back cover. 2. Remove the battery. 3. Insert a micro-SIM card into the SIM card slot.
Note Your phone supports a micro-SIM card ONLY. Dimensions of a micro-SIM card: 12mm*15mm. Inserting an SD card 1. Remove the back cover. Refer to step1 in the section “Inserting a SIM card”. 2. Place your SD card on the card slot. Push the card along the arrow direction until it stucks tightly in the slot.
Charging the battery Connect the phone to the power outlet using the included USB cable and power adapter. Note Your phone and power adapter might heat up while charging. Use other USB cable or power adapter might decrease the life span of your phone or cause fire, explosion and other hazards.
Declaration of RoHS compliance We’re determined to reduce the impact we have on the environment and take responsibility for the earth we live on.
Health and safety FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF exposure information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm.
For this device, the highest reported SAR value for usage against the head is 0.389 W/kg, for usage near the body is 1.027 W/kg, hotspot is 1.148W/kg While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body.
Legal notice Copyright Statement Copyright © 2016 by ZTE Corporation All the copyrights of this document herein belong to ZTE Corporation. Without the written permission of copyright owner, no part of this publication may be excerpted, reproduced, translated by any person or entity in any form or by any means. This document is subject to change without prior notice. ZTE Corporation keeps the right to make the final explanation to this document. Trademarks Android is a trademark of Google, Inc.
