User's Manual

3. Process the 16mm2 power cable and
ZXSDR R8881 S4200 power cable according
to the drawings inside the ODCPD1 cover.

4. Crimp four lugs onto the ends of
power wires.
5. Fix the power cables with the clamps
on the ODCPD1.The 16mm2 power cable
should be on the right, and the ZXSDR
R8881 S4200 power cable on the left.
6. Use screws to fasten the black wires
on the -48VGND terminal.
7. Use screws to fasten the blue wires
on the -48V terminal.
8. Fasten the cover of ODCPD1 with 6
screws.