User's Manual

3.2Installing12ZXSDRR8881S4200onthepole

Note:
1. The diameter
of the pole
ranges from
60mm to 120
mm. If the
diameter is no
more than 90
mm, a pad (as
shown in the
left figure)
should be used
in tightening
the
bolt;otherwise,
the pad is not
necessary.
2. The width of
the angle steel
should range
from 60 mm to
100 mm; and
the width of the
channel steel
should range
from 63 mm to
100 mm.
1.Put a fixed bolt through the installation holes (in the
middle) of each mounting bracket.