User Manual

Version Number: ZS-CUT50DP-20210204A1
5
Part 4:
Technical specifications
TYPE
ZS-CUT50DP
ZS-CUT50P
Input power voltage (V)
AC115，50/60Hz
AC220，50/60Hz
AC220，50/60Hz
Rated input current (A)
45
40
40
Rated power capacity (KVA)
4.3
6.5
6.5
Current adjustment range (A)
20-35
20-45
20-45
Welding thickness (mm)
Carbon Steel≤12.0
Stainless Steel≤12.0
Aluminum≤8.0
Copper≤4.0
Carbon Steel≤16.0
Stainless Steel≤16.0
Aluminum≤10.0
Copper≤6.0
Carbon Steel≤16.0
Stainless Steel≤16.0
Aluminum≤10.0
Copper≤6.0
Voltage adjustment range (V)
94V
98V
98V
No-load voltage (V)
280±20
280±20
280±20
Rated duty cycle
60%
60%
60%
Efficiency (%)
80%
80%
80%
Power factor
0.7
0.7
0.7
Protection class
IP21S
IP21S
IP21S
Insulation class
F
F
F
Size (mm)
490*290*340
490*290*340
490*290*340
Weight (Kg)
9.6
9.6
9.6
PART 5: safety precautions
CAUTION
1. Working Environment.
1.1 The environment in which this welding equipment is installed must be free of grinding dust, corrosive chemicals,
flammable gas or materials etc, and at no more than maximum of 80% humidity.
1.2 When using the machine outdoors protect the machine from direct sun light, rain water and snow etc; the
temperature of working environment should be maintained within -14°F to +104°F.
1.3 Keep this equipment distant from the wall.
1.4 Ensure the working environment is well ventilated.
2. Safety Tips.
2.1 Ventilation
This equipment is small-sized, compact in structure, and of excellent performance in amperage output.
The fan is used to dissipate heat generated by this equipment during the welding operation.
Important: Maintain good ventilation of the louvers of this equipment.