User Manual

Version Number: ZS-CUT50DP-20210204A1
2
6. Cutting gun pilot arc connection seat
7. Negative Welding Terminal
Negative Welding Terminal. Welding current flows from the Power Source via heavy duty bayonet type terminals. It is essential,
however, that the male plug is inserted and turned securely to achieve a sound electrical connection.
8. Cutting gun cable and gas connection seat.
Remove the black cap and connect the cutting gun.
Note: ZS-CUT50DP: input voltage is AC 110V or AC 220V , ZS-CUT50P: input voltage is
AC220V .
Part 2: Introduction to the product and configuration list
No.
Picture
Name
Qty
Remark
1
ZS-CUT50P
1
Please check outside of the whole machine
no scratch and break , it can power on
normally.
2
AG60
Cutting gun
1
4m AG60 Cutting gun.
4
Ground
clamp
1
2m 16MM2 cable, 300A Ground clamp
+10-25mm2 European quick plug.
5
Transparent
hose
1
2m 8*12 transparent network hose.
6
Hose clamp
4
Used to fix the trachea to prevent air leakage.