User's Guide

Chapter 8: Maintenance
ZoneDAS User Guide Page | 54 ZDUG Rev. 2.12, 2.25.2019
The following table describes the labels on this screen.
Table 25 Maintenance > User Account
LABEL
DESCRIPTION
Administrator
Password
Specify the password for this account. The characters are displayed as dots (•) in
this field.
Confirm Password
To ensure that the Administrator’s password has not been mistyped, please enter the
exact same password a second time.
Account Information
User Name
Enter a descriptive name for the user account. The user name must have 1~31
alphanumeric characters. Specifically, it can include 0~9, a~z, A~Z, and
@%+/!#$^.(){}[]~-_
Password
Specify the password for this account. The password must also have 1~31
alphanumeric characters. Specifically, it can include 0~9, a~z, A~Z, and
@%+/!#$^.(){}[]~-_
Confirm Password
Enter the exact same password again, for verification.
Privilege Select the privilege level for the user. There are four types of privilege levels.
• User – A user of this level can access most screens but cannot make any
changes.
• Technician – A user of this level is like a regular User but can change some basic
settings and restore configuration files.
• Super-User – A user of this level can access and configure all screens except for
User Account settings.
• Administrator – A user of this level can access and configure all screens.
Apply
Click
Apply
to save all changes to the BU’s run-time memory. The BU, by default,
does not keep each session's changes, so use the Save button on the title bar to
save changes to the non-volatile memory when configuration is complete.
Cancel Click
Cancel
to undo all changes made since last clicking
Apply
.
List of Accounts
Index
This is the index number assigned to each user account. ZoneDAS supports up to 8
user accounts.
Name
This is the name of the user assigned to this account.
Privilege This is the privilege level granted to this account.
Select Click the icon to edit this user account.
Click the icon to remove this user account.
The Restart Screen
Use System Restart to reboot the ZoneDAS BU and RUs. This may be a good way to resolve
system instability. Click Maintenance > Restart and a window such as the following will pop-
up. Click OK from there and ZoneDAS will restart.
Figure 44 Maintenance > Restart