User's Guide
Table Of Contents
- CHAPTER 1 Introduction
- CHAPTER 2 First Time Installation
- 2
- 2.1 Overview
- 2.2 System Setup
- 2.3 Configuration Step by Step
- 2.3.1 Log into ZoneDAS
- 2.3.2 Set System Time
- 2.3.3 Ensure that RF Inputs are Within Range (0 ~ 24 dBm)
- 2.3.4 Configure BU Parameters
- 2.3.5 Loading a Pre-Set Configuration with a Config File
- 2.3.6 Checking RF Activity from the BU Screen
- 2.3.7 Mount Each RU
- 2.3.8 Configure RU Parameters
- 2.3.9 Turn Service On
- 2.3.10 Fill in Descriptive Information
- 2.3.11 Set Central Management
- 2.3.12 Save Settings
- 2.3.13 Backup Configurations
- CHAPTER 3 The Web Configurator
- CHAPTER 4 Home
- Chapter 5 Setting
- Chapter 6 Fault
- CHAPTER 7 System
- CHAPTER 8 Maintenance
Chapter 3: The Web Configurator
ZoneDAS User Guide Page | 27
3.2.2 Title Bar
The title bar allows certain functions, such as the two below, to be available from anywhere
in the Web Configurator.
Figure 23 Title Bar functions
The icons provide the following functions:
Table 6 Title Bar: Web Configurator Icons
LABEL DESCRIPTION
Save
Click this button to save your configuration in the BU’s non-volatile memory. Non-volatile
memory retains the configuration of your ZoneDAS even after reboot.
Logout
Click this button to log out of the Web Configurator.
3.2.3 Navigation Panel
Use the sub-menus on the Navigation Panel to configure ZoneDAS’s features.
Figure 24 Navigation Panel