User's Guide

Chapter 2: First Time Installation
ZoneDAS User Guide Page | 22
Site name refers to the name of the building that ZoneDAS is servicing. If the building has
multiple DAS systems, then name the part of the building this unit services. Example Site
names may be: “Costco Milan 1”, “Wells Fargo Houston”, or “Big Camera Tokyo”.
Site codes are like Site names, but in short, coded forms. Using Site codes help central
management by providing easy-to-input, structured IDs for each site. Example Site codes
for the previous site names might be CCML1F3, WFHTX_ER_34F, or BCTKO123.
Once the values have been filled, click Apply.
Now let’s give names to each RU. RUs are mostly named by their respective location. To
name an RU, go to the Home screen and click on an active RU (one that is not grayed out).
This will take you to the RU screen. Find Location near the screen’s upper left corner and fill
in its value. Example Location entries for an RU may include “Lobby”, “2F Hallway”, and
“Meeting Room #1”. Once the value has been filled, click Apply and move on to the next
RU.
2.3.11 Set Central Management
if this installation site uses central management, it is time to set the Syslog Server and other
parameters. If central management is not required, please skip to the next section.
First, go to Fault on the Navigation Panel, wait for the menu to appear, and click on System
Log. This opens the System Log screen, as shown below:
Figure 17 SlimDAS System Log screen
On the bottom of that screen, there is an input box labelled Syslog Server IP. Simply input
the IP for the central syslog server, click Apply, and Syslog Setup is complete! A button
labeled “Export” is also available for saving the log file onto your client computer as a text
file.
Note: The default port for the Syslog Server is 514. To change the port, simply specify the
new port after the IP address, using a colon “:” as the separator. For example, if you type in
“193.173.20.153:214”, then 214 is the port.