User's Guide

Chapter 2: First Time Installation
ZoneDAS User Guide Page | 15
From here, simply enter the Username and Password. Default user name is “admin” and
default Password is “1234”. Once logged in, the Home screen would appear. The following
is a sample Home screen.
Figure 9 ZoneDAS home screen
If you have any problems logging into the Web Configurator, please refer to
Chapter 3.2,
Accessing the Web Configurator, where the process is explained in greater detail.
2.3.2 Set System Time
Once logged in, the first thing to do is to set the System Time and Time Zone. This will ensure
that all System Messages (and the Syslog) are stamped with the correct time and date. To
do that, click System on the Navigation Panel (the blue bar) and select Time Settings. You
will see the Time Setting screen, as shown below:
Figure 10 ZoneDAS home screen
If the computer console is set to the ZoneDAS BU’s local time, simple click on Copy from PC
and click Apply (blue button, at bottom). This will update the System Time (shown in
orange, top center) and Time Zone to those of the console and show them under New
Date, New Time, and New Time Zone.
If the computer console is not a suitable source of time information, then set the time and
date manually. Be sure to set the correct Time Zone before setting the time. Simply select
the ZoneDAS BU’s time zone from the New Time Zone drop down menu, noting that UTC is