Installation Guide

ZPESYSTEMS.COM

4-Channel Relay Module (USB)

ZPE-RL4-U01

COMPATIBLE WITH

ALL NODEGRID DEVICES

HARDWARE

Onboard DPDT Relays 4

Supply Power 12V via USB cable

Requirements 1A/ 120V AC / 2A/ 24V DC

Maximum Switching Current

Cable Included. Detached. USB Mini B to USB Type A.

3 meters (10 feet)

DESCRIPTION

Automate control of your equipment and sensors with this easy-to-use

4-port relay module. Connect to Nodegrid USB port, and relay simple

commands to devices . Control and read relay status with CLI, Web, SNMP

or Restful APIs.

ASSEMBLED IN THE USA

ZPESYSTEMS.COM +1.844.4ZPESYS

Product Specifications ZPE-RL4-U01

Quick Install Guide

PAGE 1
Product Specifications ZPE-RL4-U01 HARDWARE Onboard DPDT Relays 4 Supply Power Requirements 12V via USB cable 1A/ 120V AC / 2A/ 24V DC Maximum Switching Current Cable Included. Detached. USB Mini B to USB Type A. 3 meters (10 feet) DESCRIPTION Automate control of your equipment and sensors with this easy-to-use 4-port relay module. Connect to Nodegrid USB port, and relay simple commands to devices . Control and read relay status with CLI, Web, SNMP or Restful APIs.
PAGE 2
Quick Install Guide ZPE-RL4-U01 Let’s set up your 4-Channel Relay Module 1 Connect the module to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.