User's Manual

Mobile-Phone Backend Setting
38
4.3 Network
In the “Network” optional control page, users can view the network information that the device has
connected, set the device’s “stream mode”, “stream network” and turn on/off the built in WIFI. The user
can click on the icon in the red box mark below to select "Stream Mode".
1. When the “Stream Mode” is selected as “Automatic”, the device will automatically select one of
connected network as the current streaming network, the priority order is LAN > WIFI . Furthermore,
the user can also select the stream network by clicking “Push Flow” at the red mark box in the picture
below.
2. When the “Stream Mode” is selected as “Bonding”, the bonding mode is turned on and the device
will aggregation all connected networks as the current push network.
3. Users can also click on wired, WIFI right side of the "push flow" (red box marker below) settings
specifically using a network as a push streaming network.
a) Users can also turn built-in WIFI on/off and view network-related parameters.