User's Manual

Web Control User Interface Setting
20
Audio Type
Select an audio input source from the available signal input connections. This is the audio that will be
recorded and/or passed through.
HDMI - Use the embedded digital stereo audio of HDMI input as the audio source.
SDI - Use the embedded digital stereo audio of SDI input as the audio source.
LINE IN –Use the analog stereo input as the audio source. In this mode, user can choose to turn on/off auto
“Gain”, the default setting of auto gain is on, at this condition, user can manually set a volume. The range
of volume is 0~100.
3.6 Video Encoder
After clicking the “Video Encoder” option on the left column of the web control UI, users can see the Video
Encoder option control page. 4 parameters of Encoder can be set on this page, including “Bit Rate”, “I
Frame Interval”, “Bit Rate Control” and “Resolution”.
Bit Rate (kbps)