User's Manual

Quick Start Guide
15
2.5 Quick Start Guide
Please follow the following steps for a quick connection guidance of the encoder.
Step1. Make the Power Adapter plugged.
Step2. Press the RED Power button on the left of encoder to turn on the system.
Step3. Turn on your camera or video source and connect the output to corresponding connection of the
encoder.
Step4. (Optional) Plug speakers or headphones into the 3.5 mm headphone jack of encoder.
Step5. Connect encoder to Network.
Encoder allows you to connect multiple ways. Find brief descriptions of these modes below.
LAN mode: Connect RJ-45 Ethernet cable from the LAN port to the router.
WIFI mode: Complete WIFI connection setting, see WIFI connection setting
for the detail.
Step7. Press auto push video go to live.
NOTE:
 When WIFI connection setting is completed, don’t need to set up again unless users want to
connect to another WIFI.