User's Manual

Quick Start Guide
5
2.2.1 Physical Connections
Label Name Icon Description
Audio In Stereo audio input.
SDI Input Connect up to SDI signal.
SDI Loop Out Connect a SDI cable from this connector to a monitor or
projector.
HDMI Input Connects HDMI and DVI signals (using an adapter).
Type-C Power
Connector
Plug the power supply in here. The port requires a 15V DC
power source (center-positive).
RED Power Button Press to turn on encoder.
Press and hold more than 5 seconds to turn off.
HDMI Loop Out Connect a HDMI cable from this connector to a monitor or
projector.
TF Card Slot Plug the TF card in here.
RJ-45 Ethernet Ethernet network port.
3.5mm Audio Output
For audio confidence monitoring. Plays the audio for the
currently visible channel
Hot Shoe Mount Mount encoder to camera
NOTE:
LiveV400 has an internal rechargeable battery, so please keep it turning off and charging until
fully charged when users first use it. This is required only for the first use.
1
2
3
4
5
6
7
8
9
10
11