User`s manual

ZOTAC ZBOX nano XS

Getting to know your ZOTAC ZBOX nano XS

Front view

Refer to the diagram below to identify the components on this side of the system

1. Power switch

The power switch turns the mini-PC ON and OFF.

2. IR receiver

The IR receiver is used to receive the signal from the IR remote control.

3. Memory card slot

The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/

SDXC cards used in devices such as digital cameras, MP3 players, mobile phones

and PDAs.

4. Combo eSATA / USB2.0 port

The combo eSATA USB2.0 port is compatible with eSATA devices such as external

hard drives and Blu-ray drives, and USB2.0 devices.

5. Headphone/SPDIF jack

The headphone/SPDIF jack (3.5mm) is used to connect the system’s audio out

signal to amplied speakers or headphones. It also supports SPDIF output with

the headphone/SPDIF adapter included in the package. The optical SPDIF output

enables connecting the ZBOX nano XS to digital audio receivers and speakers for

crystal clear digital audio and surround sound from compatible soundtracks.

6. Microphone jack

The microphone jack is designed to connect a microphone for video conferencing,

voice narrations or simple audio recordings.

Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it

away from your body.

Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.