Specifications

23
Configuring the BIOS
q Hard Disk Write Protect
This will be effective only if device is accessed through BIOS.
q IDE Detect Time Out
The items allow you to select the time out value for detecting ATA/ATAPI devices.
q ATA(PI) 80pin cable detection
The items allow you to select the mechanism for detecting 80pin ATA(PI) cable.
Floppy Conguration
The items in this menu allow you to set or change the configurations for the floppy
devices installed in the system.
ACPI Conguration
The items in this menu allow you to setting general APCI configuration.
APM Conguration
These items allow you to configure Advanced Power Management.
Event Log Conguration
Make as read,clear,or view Event log statistics.
MPS Conguration
The items in this menu allow you to configure MPS.
PCI Express Conguration
The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.
Smbios Conguration
SMBIOS SMI wrapper support for PnP Function 50h-54h.
USB Conguration
The items in this menu allow you to change the USB-related features .Press <enter>
To display the configuration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q USB 2.0 Controller Mode
Allows you to configure the USB 2.0 controller in HiSpeed or Full Speed .
q BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.