Specifications

49
Installing Drivers and Software
B. Installing Windows Vista
1. Restart your system to boot from the Windows Vista setup disk and perform standard OS
installation steps. When a screen as below appears, select Load Driver.
2. Specify the location where the driver is saved, such as your oppy disk or USB ash drive.
For users using a SATA optical drive, be sure to copy the driver les from the motherboard
driver disk to a USB ash drive before installing Windows Vista (go to the BootDrv folder
and save the whole iMSM folder to the USB ash drive). Then use Method B to load the
driver.
Method A:
Insert the motherboard driver disk into your system and browse to the following directoy:\
BootDrv\iMSM\32Bit
For Windows Vista 64-bit, browse to the 64Bit folder.
Method B:
Insert the USB ash drive containing the driver les and browse to the 32Bit (for Windows Vista
32-bit) or 64Bit (for Windows Vista 64-bit) folder.