Specifications
48
Intel G4X-ITX series Motherboard
Installing the RAID Drivers and Operating System
A. Installing Windows XP
1. After you complete the RAID BIOS setup, boot from the windowsXP CD. Press <F6> as
soon as you see the screen below. A screen will then appear asking you to specify additional
device. Insert the oppy disk containing the SATA RAID/AHCI driver and press <S>.
Making a SATA RAID/AHCI Driver Disk (For RAID and AHCI Mode)
To successfully install operating system onto SATA hard drive(s) that is/are congured to RAID/
AHCI mode, you need to install the SATA controller driver during the OS installation. First, copy
the driver for the SATA controller from the motherboard driver disk to a oppy disk. For Windows
Vista installation, you can also copy the SATA controller driver from the motherboard driver disk
to a USB ash drive.
2. Then a controller menu as the screen below will appear. Select Intel(R) ICH8R/ICH9R/
ICH10R/DO SATA RAID Controller and press <Enter>. On the next screen, press <Enter>
to continue the driver installation. After the driver installation, you can proceed with the
Windows XP installation.