Specifications

23
Conguring the BIOS
Boot Menu
The Boot menu items allow you to change the system boot options .Press <enter> to
display the conguration options:
q Palette Snooping
When set to [Enabled], the pallete snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly.
q PCI IDE BusMaster
When set to [Enabled], BIOS use PCI busmastering for reading /writing to IDE
drives.
q OffBoard PCI/ISA IDE Card
Use this option to set the PCI slot number for some PCI IDE Cards holding.
q IRQ3/4/5/7/9/10/11/14/15
These items allow you to set the Interrupt Request.
q DMA Channel 0/1/3/5/6/7
Use these items to set the Direct Memory Access Channel.
q Reserved Memory Size
This item allows you to set the size of memory block to reserve for legacy ISA
devices.
Boot settings conguration
The items allow you to congure Boot settings. Press <enter> To display the
conguration options:
q Quick Boot
Enabling this item allows the BIOS to skip some power on self tests while booting
to decrease the time needed to boot the system. When set to [Disabled], BIOS
performs all the POST items.
q Quiet Boot
When set to [Disabled], displays normal POST message. When set to [Enabled],
displays OEM Logo instead of POST messages.
q AddOn ROM Display Mode
Sets the display mode for option ROM.
q Bootup Num-Lock
Allows you to select the power-on state for the NumLock.