Specifications

21
Conguring the BIOS
q ATA/IDE Conguration
Use this item to congure ATA/IDE. There are three options: [Disabled],
[Compatible] and [Enhanced]. The default setting is [Enhanced].
q Congure SATA as
This item allows you to set the SATA to IDE/RAID/AHCI mode.
q Congure SATA Channels
This item allows you to set the sequence of SATA channels. Options: [Before
PATA] and [Behind PATA].
q Hard Disk Write Protect
This item will be effective only if device is accessed through BIOS.
q IDE Detect Time Out (Sec)
The item allows you to select the time out value for detecting ATA/ATAPI devices.
q ATA(PI) 80pin cable detection
The item allows you to select the mechanism for detecting 80pin ATA(PI) cable.
SuperIO Conguration
The items in this menu allow you to congure F71862 Super IO Chipset.
Hardware Health Conguration
This menu gives you an overview of the Hardware Health Conguration.
ACPI Conguration
The items in this menu allow you to set General ACPI onguration, Advanced ACPI
Conguration and Chipset ACPI Conguration.
MPS Conguration
The items in this menu allow you to select MPS revision.The default setting is 1.4.
PCI Express Conguration
The items in this menu allow you to enable or disable PCI Express L0S and L1 link
power states.
Smbios Conguration
The item in this menu allows you to enable or disable Smbios Smi Support.
USB Conguration
The items in this menu allow you to change the USB-related features .Press <enter>
To display the conguration options:
q Legacy USB Support
Allows you to enable or disable support for USB devices on legacy operating
systems.
q USB 2.0 Controller Mode
Allows you to congure the USB 2.0 controller in HiSpeed or Full Speed .
q BIOS EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-off
feature.
Trusted Computing
The item in this menu allows you to enable or disable TCG/TPM support in BIOS.