Specifications

Intel G4X-ITX series Motherboard

Jumper Settings

This section explains how to congure the motherboard’s hardware. Before using your

computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section

whenever in doubt.

CMOS Clear Jumper-JP1

Close Open * = Default setting.

If you want to clear the system conguration, use the JP1 (Clear CMOS Jumper) to clear data.

Notice:

1. Be sure to save the CMOS setting when exit the CMOS.

2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the

frequency multiplier setting in CMOS setup is changed.

JP1 Selection

1-2* Normal*

2-3 CMOS Clear

MINI_PCIE1

PCIE1

Expansion Slots

The motherboard contains two expansion slots, one Mini PCIE slot and one PCIE x16 slot.

Mini PCIE Slot-MINI_PCIE1

There is one Mini PCIE slot, reserved for the WiFi Module.

PCIE x16 Slot-PCIE1

There is one PCIE x16 slot reserved for graphics or video card that is fully compliant to PCI

Express 1.0.

Note:ThePCIEx16slotsupportsPCIEgraphicscards,butdoesnotsupportanyPCIE

x1device.