Specifications

Hardware Installation

Installing Memory Modules

Your new motherboard has two 1.5V 204-pin slots for SO-DIMM DDR3 memory. These slots

support 1 GB/2 GB DDR3 devices. There must be at least one memory bank populated to ensure

normal operation. Refer to the following recommendations to install memory modules.

Note that a memory module has a notch, so it can only t in one direction. Refer to the following

procedure to install memory modules into the slots on the motherboard.

1. Unlock a SO-DIMM slot by pressing the module clips outward.

2. Align the memory module to the SO-DIMM slot, and insert the module vertically into the

slot. The plastic clips at both sides of the slot automatically lock the SO-DIMM into the

connector.

Note: When installing only one SO-DIMM DDR3 module, please insert it into the DDRIII-2

slot.

1.5V

DDRIII-1

DDRIII-2