WARNING! Electronic Emission Notices Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Intel D2700-ITX series Motherboard Table of Contents Motherboard Specifications----------------------------------------------------------------------------------4 Motherboard Layout--------------------------------------------------------------------------------------------6 Hardware Installation-------------------------------------------------------------------------------------------10 Safety Instructions-------------------------------------------------------------------------------------------10 Installi
Table of Contents Discard Changes and Reset-------------------------------------------------------------------------30 Save Changes-------------------------------------------------------------------------------------------30 Discard Changes----------------------------------------------------------------------------------------30 Restore Defaults----------------------------------------------------------------------------------------30 Save as User Defaults----------------------------------------------------
Intel D2700-ITX series Motherboard Motherboard Specifications q Chipset v Intel NM10 q Size v Mini ITX form factor of 6.7 X 6.7 inch q Microprocessor support v Intel Atom D2700 q Operating systems v Supports Windows Vista 32bit/64bit and Windows 7 32bit/64bit q System Memory v Two 204-pin SO-DIMMs DDR3-1066 v Maximum memory size: 4 GB q USB 2.0 ports v Supports hot plug and play v Six USB 2.
Motherboard Specifications q Audio v 8 channel High Definition Audio (including one optical SPDIF output port) v All DACs support 192k/96k/48k/44.
Intel D2700-ITX series Motherboard Motherboard Layout The motherboard inludes two versions: ATX version and DC-DC version. Users please refer to the corresponding layout picture below. Figure 1 for ATX version: 17 1819 20 21 K/B USB2.0 PW2 DP/HDMI DDRIII-2 DDRIII-1 CPUFAN1 1.5V 1.5V Chipset GPU SYSFAN1 DVI/WIFI 1 PW1 USB3.0 16 15 2 J2 J1 SATA1 LAN/USB FP_S1 CN5 SW2 CN4 AUDIO SW1 FP1 JP1 SATA2 FP_U1 SPK1 5 PCIE2 14 13 12 11 10 9 3 4 8 76 Figure 1.
Motherboard layout Figure 2 for DC-DC version: 18 19 20 K/B USB2.0 17 CN12 DDRIII-2 DDRIII-1 CPUFAN1 DP/HDMI 1 1.5V 1.5V Chipset GPU SYSFAN1 DVI/WIFI 2 USB3.0 16 15 J2 J1 SATA1 LAN/USB FP_S1 CN5 SW2 CN4 AUDIO SW1 FP1 JP1 SATA2 FP_U1 SPK1 5 PCIE2 14 13 12 Figure 2. Board Layout (DC-DC version) 1. DC-OUT Connector-CN12 2. SYS Fan Connector-SYS_FAN1 3. Power on Button_SW2 4. Front Panel Header-FP1 5. Speaker Header-SPK1 6. Clear CMOS Jumper-JP1 7. Reset Button-SW1 8.
Intel D2700-ITX series Motherboard Figure 3. Backpanel Connectors For ATX version 10 9 8 1 2 3 For DC-DC version 7 4 6 1 11 5 1. USB 2.0 Ports 2. HDMI Port 3. DVI Port 4. USB 3.0 Ports 5. Optical SPDIF Output 6. Port Blue Green Pink Black Orange 2-Channel Line-In Line-Out Mic In --- 7.
Rear panel Note: 1. Users please note that the appearance of your WiFi antenna modules may not be exactly the same as those shown in this manual. 2. Users can install one or two WiFi antennas to the motherboard. 3. Users can bend or rotate the WiFi antennas to the best receiving direction according to the picture below. 9. DisplayPort 10. PS2 Keyboard Port 11. 19V DC Power input (for DC-DC version) This motherboard contains a DC power input jack (as picture 1).
Intel D2700-ITX series Motherboard Hardware Installation This section will guide you through the installation of the motherboard. The topics covered in this section are: q Installing Memory Modules q Installing the Motherboard q Connecting Cables and Setting Switches Safety Instructions To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Hardware Installation Installing Memory Modules 1.5V 1.5V Your new motherboard has two 1.5V 204-pin slots for SO-DIMM DDR3 memory. These slots support 1 GB/2 GB DDR3 devices. There must be at least one memory bank populated to ensure normal operation. Refer to the following recommendations to install memory modules. DDRIII-1 DDRIII-2 Note that a memory module has a notch, so it can only fit in one direction. Refer to the following procedure to install memory modules into the slots on the motherboard.
Intel D2700-ITX series Motherboard Installing the Motherboard The sequence of installing the motherboard into the chassis depends on the chassis you are using and if you are replacing an existing motherboard or working with an empty chassis. Determine if it would be easier to make all the connections prior to this step or to secure the motherboard and then make all the connections. It is normally easier to secure the motherboard first.
Hardware Installation Installing an mSATA SSD module (optional) The motherboard supports one mSATA SSD via mini PCIe slot. Users please install the mSATA SSD module according to the following instructions. 1. Locate the Mini-PCIe slot of the motherboard, and insert an mSATA SSD into the slot at a 45 degree angle. 2. Gently press down on the mSATA SSD with one finger and secure the screws. Note: 1. The motherboard shipped in the box does not contain an mSATA SSD. 2.
Intel D2700-ITX series Motherboard Connecting Cables and Setting Switches This section takes you through all the connectors and switch settings necessary on the motherboard.
Hardware Installation 24-pin ATX Power Connector-PW1 (for ATX version) PW1 is the main power supply connector. Make sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure. PW2 1 PW1-Pin Definition 1.5V 1.5V PW1 12 1 24 13 Pin Signal Pin Signal 1 +3.3V 13 +3.3V 2 +3.
Intel D2700-ITX series Motherboard DC OUT Connector-CN12 (for DC-DC version) This motherboard can supply the power to SATA devices with a SATA power cable. Users can plug a SATA power cable (as picture 7) to the DC out connector (as picture 8). Picture 9 is the final image. 1 CN12 7 9 16 Assignment 1 12V 2 GND 3 GND 4 5V 1.5V 1.5V 1.5V 1 PIN 8 1.5V 1.5V 1.
Hardware Installation SPDIF-Out Header-CN5 This header provides a SPDIF (Sony/Philips Digital Interface) output to digital multimedia device through coaxial connector.
Intel D2700-ITX series Motherboard USB Headers-FP_U1 1.5V 1.5V This motherboard contains four USB 2.0 and two USB 3.0 ports that are exposed on the rear panel of the chassis. The motherboard also contains one 10-pin internal USB 2.0 header onboard. Note: Secure the bracket to either the front or rear panel of your chassis (not all chassis are equipped with the front panel option).
Hardware Installation Fan Connectors There are two fan connectors on the motherboard, including system fan connector-SYSFAN1 and CPU fan connector-CPUFAN1. CPUFAN1 GND +12V Sense Control Sense +12V 1.5V 1.5V Control GND SATA1 SYSFAN1 SATA2 Serial-ATA (SATA) Connectors (SATA1/2) The Serial ATA connector is used to connect the Serial ATA device to the motherboard. These connectors support the thin Serial ATA cables for primary storage devices.
Intel D2700-ITX series Motherboard Expansion Slots 1.5V 1.5V The motherboard contains three expansion slots, twe Mini PCIe slots and one PCIe x16 slot. J1 J2 PCIE2 Mini PCI Express Slots-J1/J2 There are two Mini PCI Express slots. J1 supports one half-sized WiFi card. J2 supports one mSATA SSD. (Please refer to page 13 to install the mSATA SSD module.) PCI Express x16 Slot-PCIE_X16 There is one PCIe x16 slot reserved for graphics card. It is fully compliant with PCIE 2.0 specification.
Hardware Installation Jumper Settings This section explains how to configure the motherboard’s hardware. Before using your computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section whenever in doubt. CMOS Clear Jumper-JP1 JP1 Selection 1 1-2* Normal* 1 2-3 CMOS Clear Close Open * = Default setting. If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) or SW1 (Clear CMOS Button) to clear data. Notice: 1.
Intel D2700-ITX series Motherboard Configuring the BIOS This section discusses how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. Enter BIOS Setup The BIOS is the communication bridge between hardware and software. Correctly setting the BIOS parameters is critical to maintain optimal system performance. Refer to the following procedure to verify/change BIOS settings. 1. Power on the computer. 2.
Configuring the BIOS q Memory Information Displays the auto-detected memory information. q HDD Information Displays the auto-detected HDD information. q System Date/Time Allows you to set the system date/time. X-Setting Menu The X-Setting menu items show the settings of voltage control. q DRAM voltage Control Use this item to set the DRAM voltage. q VCC voltage Control Use this item to set the VCC voltage. q CHIP voltage Control Use this item to set the chip voltage.
Intel D2700-ITX series Motherboard Advanced Menu The Advanced menu items allow you to change the setting for the CPU and other system devices. Press to display the configuration options: OnBoard Device Config The items in this menu allow you to set PCI Express port, HD Audio and so on. q PCI Express Port 0/1/2/3 Use this item to set the PCI Express Port. q Launch PXE OpROM Use this item to enable or disable Launch PXE OpROM.
Configuring the BIOS CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Press to display the configuration options: q Hyper-Threading Enable this function for Windows and Linux4 OS, (OS supports Hyper Threading Technology). Disable this function for other OS. (OS not optimized for Hyper Threading Technology). q Core-Multi Processing Use this item to enable or disable Core-Multi processing.
Intel D2700-ITX series Motherboard Intel Fast Flash Standby The items in this menu allow you to change Intel Fast Flash standby features. Press to display the configuration options: q iFFS Support Use this item to enable or disable iFFS. q Entry on S3 RTC Wake Use this item to enable or disable entry on S3 RTC wake. q Entry After Use this item to set the number of minutes of entry after. q Entry on S3 Critical Battery Wake Use this item to enable or disable entry on S3 critical battery wake.
Power Management Menu The items in this menu allow you to control the system power management. Press to display the configuration options: q Enable Hibernation Enable or disable system ability to hibernation (OS/S4 Sleep State). This option may be not effective with some OS. q ACPI Sleep State Select the highest ACPI sleep state, the system will enter when the SUSPEND button is pressed. q Restore AC Power Loss This item allows you to configure how the system board responds to a power failure.
Intel D2700-ITX series Motherboard Boot Menu The Boot menu items allow you to change the system boot options. Press to display the configuration options: q Setup Prompt Timeout Use this item to set number of seconds to wait for setup activation key. q Bootup NumLock State Use this item to select the keyboard NumLock state: [On] or [Off]. q Security Settings The security menu items allow you to change the system security settings.
Configuring the BIOS q Full Screen Logo This option allows you to enable or disable the display of the full-screen logo when the system boots. Use the and keys to toggle between [Enable] and [Disable]. q GateA20 Active When set to [Upon Request], GA20 can be disabled using BIOS services. When set to [Always], GA20 can not be disabled; this option is useful when any RT code is executed above 1MB. q Option ROM Messages Use this item to set display mode for Option.
Intel D2700-ITX series Motherboard Discard Changes and Exit Select this option only if you do not want to save the changes that you have made to the setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting. Save Changes and Reset Select this item and press to reset the system after saving the changes.
Configuring the BIOS FLASH Update Procedure The program EFUDOS.exe is included in the driver dsk (X:\Utility\EFUDOS.exe). Please follow the recommended procedure to update the flash BIOS, as listed below. (X: your driver disk letter). 1. Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or downloaded) and the utility program EFUDOS.exe to the diskette. 2. Allow the PC system to boot from the DOS diskette. 3. At the DOS prompt, type EFUDOS XX.
Intel D2700-ITX series Motherboard Installing Drivers and Software Note: 1. It is important to remember that before installing the driver disk that is shipped in the kit, you need to load your operating system. The motherboard supports Windows Vista 32 bit/64 bit and Windows 7 32bit/64bit. 2. For best compatibility, please only use the onboard SATA or USB 2.0 ports as the OS installation source drive connection. The kit comes with a driver disk that contains utility drivers and additional software.
Installing Drivers And Software 2.
Intel D2700-ITX series Motherboard 3.
Installing Drivers And Software 4.
Intel D2700-ITX series Motherboard 5.
Installing Drivers And Software 6. Left-click Etron USB 3.
Intel D2700-ITX series Motherboard 7.
Installing Drivers And Software 39
Intel D2700-ITX series Motherboard At last, you can enter Computer Management that provides information about the hardware devices on this motherboard to check if the driver installation is complete.
Installing Drivers And Software Realtek HD Audio Driver Setup Getting Started After Realtek HD Audio Driver being installed (insert the driver dsk and follow the on-screen instructions), “Realtek HD Audio Manager” icon will show in System tray as below. Double click the icon and the control panel will appear: Double click to enable Realtek HD Audio Manager Digital Output After clicking on the “Sound Effect” tab, 3 sections “Environment”, “Equalizer” and “Karaoke” are available for selection.
Intel D2700-ITX series Motherboard Environment Simulation You will be able to enjoy different sound experience by pulling down the arrow, totally 23 kinds of sound effect will be shown for selection. Realtek HD Audio Sound Manager also provides five popular settings “Sewer pipe”, “Bathroom”, “Arena”, “Stone Room”, and “Auditorium” for quick enjoyment. Equalizer Selection Change to graphic EQ by clicking on the Equalizer icon you to create your own preferred settings by utilizing this tool. .
Installing Drivers And Software Speakers Realtek HD Audio Manager frees you from default speaker settings. Speakers includes four tabs: Speaker Configuration, Sound Effects, Room Correction and Default Format. Speaker Configuration In this tab, you can choose speaker configuration: Stereo, Quadraphonic, 5.1 Speaker or 7.1 Speaker using “Up/Down Arrow”.
Intel D2700-ITX series Motherboard Microphone This page is designed to provide you better microphone/recording quality. Below picture indicates both “Noise Suppression” & “Acoustic Echo Cancellation” are both enabled. Noise Suppression If you feel that the background noise, especially the sound generated from the fan inside PC, is too loud? Try “Noise Suppression”, which allows you to cut off and suppress disturbing noise.
Installing Drivers And Software Line In Realtek HD Audio Manager integrates “Volume Control” functions into the Line In page. This gives you the advantage to you to create your favorite sound effect in one single tool. Single click on the volume icon mute mode.
Intel D2700-ITX series Motherboard Device Advanced Settings Click on “Device advanced settings” at the upper right corner of Realtek HD Audio Manager page, and you can set the playback device and recording device as below. Connector Settings Click on the icon on the main page of Realtek HD Audio Manager, and the Connector Settings dialog will display. There are two settings: “Disable front panel jack detection” and “Enable auto popup dialog, when device has been plugged in”.
Information Click on the icon at the lower right corner of Realtek HD Audio Manager page, the Realtek HD Audio information will display. Hardware / Software information of your audio system Language setting When “Audio” is chosen, this language setting would accommodate to OS language on your systems. Quick launch button at system tray This section provides information about your current system audio device. The screenshots shown in this section are for Windows® 7 operating system.
Intel D2700-ITX series Motherboard 48 291-MA212-01
