Instructions / Assembly

• Do not install the camera where rain and snow may hit the lens directly.
• Camera may work in extremely cold conditions as low as -10°C as it will
produce heat when powered on. You may power the camera indoors for a
few minutes before installing it outdoors. (Only for outdoor cameras)
2. Mount the Camera to the Wall
Drill holes according to the mounting template.
NOTE: Use the anchors included in the package if needed.
Attach the camera bracket with screws included in the package.
NOTE: Run the cables through the cable notch on the mounting base. For
WiFi cameras, it is recommended to mount the antenna upward or
horizontally for better WiFi connection.
3. Installation Distance, Height and Angle
Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).
Angle: Tilt the camera down about 30°-60°from the horizontal position.
Height: Install the camera 8-16 ft (2.5-5m) above the ground.
English 6