POE Camera User Manual *Please read this guide carefully before use and keep it properly.
1.
Network Indicator Lens Spotlight IR LEDs CDS Network Port Power Port CDS Lens IR LEDs Power Port Network Port 2
Lens IR LEDs Microphone Power Port Network Port Microphone IR LEDs Network Indicator Lens Power Port Network Port 3
CDS IR LEDs Lens Network Port Power Port 2.Install the Camera ༃ AƩach the mounƟŶŐ template, drill screw holes on the wall according to the mounƟŶŐ template, and insert rubber plugs into the holes. ༄ Align the camera with the rubber plugs on the wall, and use a screwdriǀer(not included) to screw into the rubber plugs. ༅ Adjust the camera to a proper angle and screw the bracket.
3. Connect the System VGA AUDIO OUTU LAN SB 2.0 POE 1P OE 2 POE 3P OE 4 POE 5P OE 6 POE 7P OE 8 DC 48V Product picture for reference only, specific product in kind prevails. 4. FAQ Q: What Ethernet Cable Can Work with the Cameras? A: Our cameras support CAT5, CAT6 or CAT7 Ethernet cables. Q: The Camera Cannot Be Powered on? A: If your PoE camera is powered by the PoE port of a PoE device via an Ethernet cable, please use another Ethernet cable or try a different port on the PoE device.
