Instructions / Assembly

06
④ Once the camera is installed, you may
rotate the camera body and adjust it to
a proper angle.
③ Mount the camera to the
mounting plate and turn it
clockwise to lock the camera.
Make sure the camera is locked
in place otherwise the camera
could be removed when you turn
the camera counterclockwise to
adjust the angle.
NOTE: Place the cable in cord slot
on the camera bracket.
② Drill holes according to the
mounting template. Then screw
the mounting plate to the wall at
the indicated locations.
NOTE: The above applies to
wooden walls. It is necessary to
insert anchors into the holes for
wall made out of other hard
materials.
DOME CAMERA：
① Hold and press on the top of the
camera and turn it counterclockwise
to get off the mounting plate from
the dome camera.