Instructions / Assembly

03
3/ Connection Diagram
NOTE: The cameras in the kit do not support connection via Method
A.The PoE cameras are fully compatible only with our company's
PoE NVR.
1. Connect the camera to the PoE switch or injector.
Before initial setup, follow the steps below to connect the camera.
A
1. Connect the camera to the PoE port of NVR via an Ethernet cable.
2. After the device is powered on, the NVR will automatically search
and add cameras to display live video.
B
Network CableNetwork Cable
PoE switch (not included)
Router
Camera
POE port 100/1000Mbps
Power
Gigabit PoE Switch
UP-LINK 1000Mbps
AUDIO OUT
NETWORK
VGA
POE 15POE 13
POE 11POE 9POE 7POE 5POE 3POE 1
POE 16POE 14
POE 12POE 10POE 8POE 6POE 4POE 2
DC 48V