PoE Camera User Manual This guide will get you going with your camera. For more details and information of the camera, please contact us or your dealer.
1/ What’s in the Box or Camera×1 Mounting Screws×1 or Mounting Templates×1 Ethernet Cable×1 Waterproof Lid×1 Quick Start Guide×1 NOTE: • The number of accessories varies with the camera model you purchased.
2/ Camera Introduction Built-in Speaker Microphone Lens Spotlights*2 Infrared LEDs*4 Power Port Network Port Reset Button *Press and hold for 5 seconds to reset the camera to factory settings. Micro SD Card Slot Lens Spotlights*2 Infrared LEDs*2 Microphone Speaker Micro SD Card Slot Power Port Network Port Reset Button *Press and hold for 5 seconds to reset the camera to factory settings. NOTE: Actual appearance and accessories are subject to the model you purchased.
3/ Connection Diagram Before initial setup, follow the steps below to connect the camera. A 1. Connect the camera to the PoE switch or injector. PoE switch (not included) UP-LINK 1000Mbps POE port 100/1000Mbps Power Router Gigabit PoE Switch Camera B Network Cable Network Cable 1. Connect the camera to the PoE port of NVR via an Ethernet cable. 2. After the device is powered on, the NVR will automatically search and add cameras to display live video.
4/ Set up the Camera Download and launch the VSees App or client software and follow the on-screen instructions to complete the initial setup. · On Smartphone Scan to download VSees App. VSees NOTE: If you are connecting the PoE camera to the supplier's PoE NVR, please set up the camera via the NVR interface.
5/ Install the Camera 1. Installation precautions • Avoid directing the camera towards strong light or reflective objects, including sunlight, lights, glass, mirrors and other areas with strong refraction of light sources. • Do not install at location with objects covering or obscuring the camera. • Avoid mounting the camera in places where too dim, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions.
DOME CAMERA： ① Hold and press on the top of the camera and turn it counterclockwise to get off the mounting plate from the dome camera. ③ Mount the camera to the mounting plate and turn it clockwise to lock the camera. Make sure the camera is locked in place otherwise the camera could be removed when you turn the camera counterclockwise to adjust the angle. NOTE: Place the cable in cord slot on the camera bracket. ② Drill holes according to the mounting template.
BULLET CAMERA： ① Drill holes according to the mounting template, and insert the anchors into the holes. ② Align the camera bracket with the indicated location, and screw the camera to the wall. NOTE: Place the cable in cord slot on the camera bracket. ③ Loosen the adjustment knob of the bracket, rotate and adjust the camera to a proper angle. ④ Tighten the adjustment knob of the bracket to lock the camera.
3. Installation Distance, Height and Angle Distance: Best accuracy for objects within 5-50 ft (1.5-15 m). Angle: Tilt the camera down about 30°-60°from the horizontal position. Height: Install the camera 8-16 ft (2.5-5m) above the ground. NOTE: The accuracy of human detection will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc.
7/ FAQ Q: What Ethernet Cable Can Work with the Cameras？ A: Our cameras support CAT5, CAT6 or CAT7 Ethernet cables. Q: The Camera Cannot Be Powered on？ A: If your PoE camera is powered by the PoE port of a PoE device via an Ethernet cable, please use another Ethernet cable or try a different port on the PoE device. Or, you can use a DC 12V power adapter for power supply.
Correct Disposal of this Product This marking indicates that this product cannot be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please visit the Return and Collection System or contact the retailer from whom the product was purchased.
