Data Sheet

Technical Data
Device
Build volume 300 x 300 x 300 mm (11.8 x 11.8 x 11.8 in)
Material container Spool
Material diameter 1.75 mm (0.069 in)
Nozzle diameter 0.4 mm (0.016 in)
Support
Mechanically removed - printed with the same material as
the model
Extruder Single (upgraded for more demanding materials)
Extruder cooling
system
Radial fan cooling the extruder block; two fans cooling the
print
Hotend Redesigned (v3), new geometry of the nozzle
Platform Perforated, heated
Material endstop Mechanical
Connectivity Wi-Fi, Ethernet, USB
Operating system Android
Processor Quad Core
Touchscreen 4” IPS 800 x 480
Camera Yes
Available mate-
rials
Z-ULTRAT, Z-PETG, Z-GLASS, Z-HIPS, Z-ASA Pro, Z-PLA Pro,
Z-ESD, Z-SEMIFLEX
External materials Applicable
Temperature
Maximum printing temperature (extruder) 290° C (554° F)
Maximum platform temperature 105° C (221° F)
Ambient operation temperature 20 - 30° C (68- 86° F)
Storage temperature 0 - 35° C (32- 95° F)
Electrical
AC input 110 V ~ 5.9 A 50/60 Hz ; 240 V ~ 2.5 A 50/60 Hz
Maximum power
consumption
360 W
Software
Software bundle Z-SUITE
Supported le
types
.stl, .obj, .dxf, .3mf
Supported operat-
ing systems
Mac OS X / Windows 7 and newer versions
Weight and physical dimensions
Without a spool
(W x D x H)
479.5 x 514 x 664.5 mm (18.88 x 20.24 x 26.16 in)
With a spool 479.5 x 575.6 x 664.5 mm (18.88 x 22.66 x 26.16 in)
Shipping box 566 x 566 x 823 mm (22.28 x 22.28 x 32.4 in)
Device weight 41 kg (90.4 lb)
Shipping weight 55 kg (121.3 lb)
Printing
Technology
LPD (Layer Plastic Deposition) – depositing melted
material layer by layer onto the build platform
Layer resolution 90 - 290 microns
Minimal wall thickness 400 microns
Platform levelling Automatic measurement of platform points' height
In the box
3D Printer, Hotend V3, Side Covers, Z-SUITE, Starter Kit, 2 spools of material,
spoolholder
Additional information
Each delivered printer may have worked up to 90 hours during the quality control
test prints.
All information contained in this brochure and specication is subject to change
without notice.
• Large build volume (300x300x300 mm)
• Wi-Fi and Ethernet connectivity
• 3D printing farms ready
• Advanced remote management
• Filament endstop mechanism
• Built-in camera
• Intuitive LCD touchscreen
• Improved axes geometry
Technical Data
• Upgraded cooling system
(double fan and extruder cooling)
• Upgraded extruder (redesigned hotend v3 and
nozzle with new geometry)
• Compatiblewithex-typematerials
• Compatible with Z-ULTRAT
• Widerangeofdedicatedlaments
• External materials are applicable