User Guide

©2021, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
38
Navigating through the Menu
The printer’s functions can be activated or deactivated through the options available in
the menu.
The main menu is divided into four submenus: HOME, TOOLS, SETTINGS, and PRINT. Each
category is discussed in detail below.
HOME: this menu displays all relevant information about the printer: the printer’s IP ad-
dress, the type of connection to a local network: either Wi-Fi or Ethernet cable, the mate-
rial loaded into the extruder, and storage used on the USB flash drive.
TOOLS: this menu contains options that are useful during the printing process and main-
tenance work connected with the printer’s main components:
MATERIAL
Unload material – choose this option to change the material for a different color or type.
Load material – choose this option before starting the print or after changing the material.
PLATFORM
Heat platform - this function heats up the platform to operating temperatures. It can be
useful while performing platform maintenance work.
Move platform - this function allows you to change the position of the platform. Move up
the platform if you want to access the bottom plate in order to clean it.
Calibrate - this function activates the procedure of platform calibration.
HEAT EXTRUDER - this function heats up the extruder to operating temperatures. It is very
useful while replacing the nozzle and performing other extruder maintenance activities.
RUN FAN TEST - this function allows you to check the extruder fans for proper operation.
SETTINGS:
Wi-Fi - this tab shows all available Internet networks and allows you to connect the printer
to the chosen network.
Ethernet - this tab allows you to control the Ethernet connection settings.
Language - this tab allows you to change the language of the menu and printer messages.