User Guide

©2021, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection.
30
Firmware Update
If your printer is connected to the Internet using either Wi-Fi or an Ethernet cable, it
automatically checks for available firmware updates. Every time you turn on the printer,
you will see the launcher displaying information about the current firmware version and
whether the firmware can be updated. Once you get this notification, follow the instruc-
tions displayed on the screen.
You can also check if there is an available firmware update using options from the menu.
Open the Settings menu and select About printer, and then Check for updates.
If you have decided not to connect the printer to the Internet, check https://support.zor-
trax.com/downloads/ regularly for updates. To update the firmware, transfer the Update.
zar file to a USB flash drive and plug it into the port at the front of the device. To start the
installation, select Refresh.