User manual

16
5. Select the temperature
Turn the temperature selector dial to the required
temperature.
6. Select the required
programme
Turn the programme selector dial clockwise to the
required programme.
7. Start the machine
Before starting up the machine check that:
• the appliance is plugged in,
• the water supply tap is turned on,
• the drain hose is correctly and securely
positioned,
• the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.
8. At the end of the programme
The machine stops automatically.
If you have selected a “gentle” programme, the
machine will stop with the water of the last rinse left
in the tub, to prevent the fabric from creasing. To
drain the water and spin, select programme 10. To
drain only, select programme 11.
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
Remove the laundry.
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or
their colour running into a load of whites.
Release any buttons which have been pressed.
When the programme has finished you are advised
to unplug the appliance and turn off the water tap.
Leave the door ajar to air the machine.
M0021
60
2
M0025S
T0003
124970130.qxd 27/04/01 15.28 Pagina 16 (Nero/Process Black pellicola)