Users Manual

06
07
080910111213141516
4
Settings
06
07
080910111213141516
5
Troubleshooting
?
Warning
Under any circumstances, never try to repair the box by yourself, this will invalidate
warranty. Do not open the box due to electric shock risk. If any fault occurs, first
check the following instruction before taking the box for repairing. If you are unable
to remedy a problem by following hints, consult your dealer for help.
Problem Solution
No signal on the TV
Can not turn on your
Smart TV Box
Can not connect to
network
Remote Control does
not respond
Some TV can not
display entire screen
securely connected.
Check if the HDMI or AV cable is
1)
input source on your TV.
Check if your have selected the correct
2)
plugged into the DC socket of your Smart
Check if the power connector is completely
1)
Check if the power supply is stable.
2)
securely connected and the Ethernet works
Make sure that the network cable is
1)
well.
Make sure that WiFi network is connected
2)
Make sure that the batteries are good.
1)
no longer than 8 meters.
remote control and your Smart TV Box is
Make sure that the distance between the
2)
Setup the screen display position of your
Smart TV Box.
Settings->display->Display position
TV Box.
and the security key for the encrupted
network is correct.
Make sure that you select the correct IP
3)
address settings.
Preface
Statements
We have made every effort to provide the most current information about the product.
We do not grant any guarantees as to the contents of the present instruction manual and
purposes. The disclaim any implied guarantees concerning market value or suitability for specific
information contained here is an instruction intended to enable the correct usage and maintenance
of the receiver.
We reserve itself the right to introduce amendments, changes or translations of the user
without prior notification thereof. For this reason, we recommend youmanual regularly visit our
website in order to obtain the latest information.
Thanks very much for choosing our Smart TV BOX.In order to make it more convenient
using and properly keep it for reference.
for you to use proficiently, we provide you with a user manual. Please read it carefully before
1
Package Contents
NO.
Picture
Name Piece
1
2
3
4
5
1
1
1
1
1
Note: Other contents are optional.
Specification
Smart TV BOX
IR remote control
Power Adaptor
HDMI Cable
User Guide
Page Up Page Down
FWD
VOL
+
VOL
-
Volume Down
Volume Up
Last One
Next One
TV
AV cable
Television
HDMI cable
Network cable
Router
Adaptor cable
Octa Core
Android6.0MarshmallowOS
Mali-T820MP3 GPU up to 750MHz
Amlogic S912 Octa core ARM Cortex-A53 up to 2GHz+ ARM
Video Decoder: 4Kp60 10-bit H.265, 4Kp60 VP9 Profile 2, 4Kp30 H.264
576i/p, 720p, 1080i/p, 4Kx2K
Ethernet GigaBit Rj45 Port and internal WiFi 802.11 ac/a/b/g/n Dual Band WiFi
(2.4ghz/5gHZ)
Move to “Settings” icon, press ok to enter into system settings. You will see the menu on the
following picture. If you want to see more settings, please select “More Setting” sicon.
Wi-Fi
With Wi-Fi enabled, you’ll need to click on your network’s name and enter the password.
An on screen keyboard should appear if you’re using the standard infrared remote control.
Ethernet
If you will use a network cable instead of Wi-Fi, please select this option instead.
MEDIA
MEDIA
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device,
Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.