User`s guide

23 | P a g e
Deactivating Alarm
The alarm will be silenced after 34 seconds without any intervention.
To silence the alarm and keep the system armed press the triangular
button.
Press the circular button to silence the alarm, deactivate the system, and
unlock the cable.
Unlocking
1. Press the circular button to disarm the system and unlock the cable from
the box.
2. Use the key to remove the cable from the CABL unit.
3. Fully remove the cable from the bicycle and return it to the snapped strap.
Recharging
1. Disconnect the wires from the box.
2. Remove CABL from mounting bracket.
3. Plug into wall outlet using included wall adapter.
Note: Recharging should be done nightly.
Tracking
See included Zoombac user guide.
Universal A-GPS Locator
User Guide
Zoombak Services
Universal A-GPS Locator
www.zoombak.com
COPYRIGHTS
© 2008 Zoombak. All rights reserved.
Zoombak is a trademark of Zoombak, LLC.
NOTICES
This document neither grants any license nor conveys any rights with
respect to the subject matter hereof or otherwise. Zoombak expressly
retains all intellectual and other property rights with respect to this
document and all matters set forth herein. This document is neither
an offer nor an acceptance. Neither party will be obligated with
respect to the subject matter hereof unless and until such party has
entered into a definitive agreement, and then only in accordance with
the terms of such agreement. Some technical assertions of capability
included herein are estimates based on limited information gathered
from past experience. Terms and conditions apply to the purchase,