User Manual

Using USB functions

148

Using SD card recording and audio interface functions at the same time (Audio Interface with Rec)

(continued)

Disconnecting

1. Press .

2. Use to select

Off

, and

press

3. Disconnect the cable from the computer and the

NOTE

• The

cannot operate on USB bus power. Use the internal

batteries, the dedicated AC adapter or an external DC power

supply to power it.

• Audio Interface with Rec cannot be used with the following

settings and functions.

- Sampling rate settings other than 44.1/48 kHz

- SD Card Reader (→ P.144)

- Audio Interface (→ P.145)

- (→ P.152)

• A driver is necessary for use with Windows. Download the driver

from the ZOOM website (www.zoom.co.jp/).

• When Audio Interface with Rec is set to On, the sampling rate

cannot be changed.

• When Audio Interface with Rec is set to On, ﬁles with sampling

rates that differ from the setting cannot be played.

• Set the input source to USB1–4 (→ P. 80) or set USB1–4 to the

output routing (→ P109, 122, 123) to monitor sound played back

from the computer. (→ P. 80)

• When Audio Interface with Rec is set to On, the latency

will increase 2 ms. When monitoring sounds being recorded

with a mic in real-time, increased latency can cause interference

between sound transmitted through the air from the source

and the delayed monitored sound, possibly making accurate

monitoring of the sounds difﬁcult.