Quick start Guide

3
Assembly and connections
Shock mount
This can reduce noise when the is mounted on a digital SLR camera.
1.
Attach the ends of two arms from the shock mount
to one
belt loop.
2.
Attach the other arms one at a time to the other
belt loop.
Using the elasticity of the arms, attach their ends to the belt
loops while bending them slightly.
3.
Slide the shock mount onto the camera accessory
shoe and tighten the screw to attach it.
Mic capsules
1.
Remove the protective caps from the and the
mic capsule.
2.
While pressing the buttons on the sides of the mic
capsule, connect it to the
, inserting it com-
pletely.
3.
To disconnect the mic capsule, pull it away from
the unit while pressing the buttons on its sides.
2, 3
3
2
1
Arms (2 each on left and right)