Datasheet

Datasheet
Datasheet
16/34
BD9271KUT
TSZ02201-0F1F0C100260-1-2
© 2013 ROHM Co., Ltd. All rights reserved.
27.Feb.2015 Rev.004
www.rohm.com
TSZ22111・15・001
Note: For counting values, a counter that counts one every four HSYNC signals is used.
Default : set08h(8d) to 8 counts
Due to there are 4 types of ERRSTATE, the mask time from PWM=H to ERRDET=L is HSYNC8～11 clks.
The data in register is update to the newest data when the next VSYNC signal rises up (positive-edge trigger).
●ADDR=05h
ERRLEDOPA (LED1 to LED8 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRLEDOP_08 ERRLEDOP_07 ERRLEDOP_06 ERRLEDOP_05 ERRLEDOP_04 ERRLEDOP_03 ERRLEDOP_02 ERRLEDOP_01
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=06h
ERRLEDOPB (LED9 to LED16 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRLEDOP_16 ERRLEDOP_15 ERRLEDOP_14 ERRLEDOP_13 ERRLEDOP_12 ERRLEDOP_11 ERRLEDOP_10 ERRLEDOP_09
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=07h
ERRLEDSHA (LED1 to LED8 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRLEDSH_08 ERRLEDSH_07 ERRLEDSH_06 ERRLEDSH_05 ERRLEDSH_04 ERRLEDSH_03 ERRLEDSH_02 ERRLEDSH_01
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=08h
ERRLEDB (LED9 to LED16 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRLEDSH_16 ERRLEDSH_15 ERRLEDSH_14 ERRLEDSH_13 ERRLEDSH_12 ERRLEDSH_11 ERRLEDSH_10 ERRLEDSH_09
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=09h
ERRRESSHA (LED1 to LED8 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRRESSH_08 ERRRESSH_07 ERRRESSH_06 ERRRESSH_05 ERRRESSH_04 ERRRESSH_03 ERRRESSH_02 ERRRESSH_01
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=0Ah
ERRRESSHB (LED9 to LED16 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRRESSH_16 ERRRESSH_15 ERRRESSH_14 ERRRESSH_13 ERRRESSH_12 ERRRESSH_11 ERRRESSH_10 ERRRESSH_09
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.
●ADDR=0Bh
ERRMOSSHA (LED1 to LED8 ERROR pin monitor: Read)
Bit 7 6 5 4 3 2 1 0
Register
Name
ERRMOSSH_08 ERRMOSSH_07 ERRMOSSH_06 ERRMOSSH_05 ERRMOSSH_04 ERRMOSSH_03 ERRMOSSH_02 ERRMOSSH_01
Default
0 0 0 0 0 0 0 0
The data in register is updated to the newest data immediately when the new data is written.