ADSL Modem User's Manual

Chapter 2: Advanced Setup Options 27
To set this static IP address, go to
Start | Settings | Network
and Dial-up Connections
. Right-click
Local Area
Connection
and select
Properties
. Click the
Install
button.
Select the
Internet Protocol TCP/IP
option and click
Properties
. Click the radio buttons
Use the following IP
address
and
Use the following DNS server addresses
, enter
the following data, and click
OK
.
IP address
10.0.0.15
Subnet mask
255.255.255.0
Default gateway (X4’s LAN IP address)
10.0.0.2
Preferred DNS server
10.0.0.2
Note:
These TCP/IP instructions and screenshot are typical of a
computer using Windows 2000 or XP; if you are using
Windows 98 or Me, yours may differ slightly. If you are
using Windows 95, or are a Macintosh or Linux user, and
need help with your TCP/IP settings, turn to the
Appendix on page 46. Otherwise, continue to Step 4.