User manual


42
Figure 6. Example of Security Page
To restore the Cable Modem/Router to factory defaults:
1 In the Security submenu, select the Yes button next to Restore Factory Defaults.
2 Click Apply.
3 Click OK to reboot the Cable Modem/Router. The reboot is complete when the
POWER LED stops blinking.
4 If the Login screen doesn’t reappear, click the Refresh link to log back in to the
Configuration Manager.
Table 3. Security Menu Option
Option Description
User Name
Enter the new User Name for the administrator.
Current Password
Enter the existing security password. The password can be
found on the bottom label of the unit
New Password
Enter the new security password.
Re-Enter New
password
Re-enter (confirm) the new security password.
Reboot
Click the Yes button next to reboot, then click Apply to reboot
the router.
Mode
Click the Bridge button if you do not wish to use the 5352 as a
router. Most users should not change this setting.
Note: DO NOT restore factory defaults to any changes on this page.