User manual

There is one small frame named “Active Frame”. It can be moved from one item to

another by using direction keys ([↑][↓]). When the “Active Frame” is located on one

icon, you can press [ENTER] key to enter the sub menu. For example, move the

“Active Frame” to “Camera” icon, press [ENTER] to enter the sub menu as follows

Fig.3.4 below:

Fig. 3.4 Camera input adjustment

Each menu contains different kinds of items. There is a small rectangular frame

named “Active Frame” which is pointing to the selected item. This “Active Frame”

can be moved by direction keys ([↑][↓][←][→]). There are several kinds of menu items

as follows:

1. Check Box: Provides two options, “” means enable and “×” means disable.

You can use [ENTER] or [EDIT] key to switch over.

2. List Box: Provide more than 2 options. Only one of them can be selected.

After pressing [EDIT] you can use [↑] and [↓] to select one option. For

example, on the right side of “Select Camera”, there is a list box for you to

select one camera.

3. Edit Box: This is for you to input characters. Press[EDIT]key to enter the

edit status, you can input text there:

a) Press[A]key to select number, upper case, lower case or symbols;

b) Use[→]and[←]keys to move cursor;

c) Use[EDIT]key to delete the character in front of cursor;

d) Press [ENTER] to save & [ESC] to exit without saving.

4. Button: Trigger a special function or enter the next sub-menu. For example,

press “Policy” button to enter the sub-menu. Press [Confirm] to save

parameters and return to main menu. Press [Cancel] button to cancel and

return to main menu. The button in grey means it can be operated only after

being enabled.