User`s manual

20 Zoom Cable Modem User’s Manual
3
33
3 Under the Show drop-down tab (OS X 10.3.x) or the
Configure drop-down tab (OS X 10.2.x), choose Built-in
Ethernet.
4
44
4
Under the TCP/IP tab, make sure that Using DHCP is
highlighted in the Configure: list box. Do not enter anything
into the DHCP Client ID field.
5
55
5 Click Apply Now (or Save if prompted) and close the
Network pane.
Congratulations! This completes the installation of your modem.
Go to Chapter 3: Using Your Cable Modem on page 13.
Mac OS 7.6.1 - 9.2.2
1
11
1 From the Apple menu, choose Control Panels and then
TCP/IP to display the TCP/IP Window.
2
22
2 Under Connect via:, select Ethernet built-in.
3
33
3 Under Configure:, select Using DHCP Server. Do not enter
anything in the DHCP Client ID field.