User`s manual

Chapter 3: Using Your Cable Modem 13
3
Using Your Cable Modem
Now that you have installed your Zoom cable modem and it
has synchronized itself with the cable network, your cable
modem is ready to connect to the Internet.
To Connect to the Internet
To connect to the Internet, use your Web browser. If you are a
Windows user and cannot connect, your Web browser settings may
need adjustment. Your Web browser should be set to use a
network connection (this might be called a “Local Area Network”
or “broadband” connection). Refer to page 26 if you need help
doing this.
When you are done surfing the Web, close the browser. There is
no need to unplug your modem. Your modem will remain
connected with the cable system so that you can access the Internet
at any time by opening your Web browser. Some cable companies
request that you keep your modem on so that they can perform
periodic software maintenance. However, if you do unplug your
cable modem or if you lose power, you will have to wait while it
powers up and synchronizes with the cable company before you
can access the Internet.
You can use the modem’s Ethernet option and the USB option
simultaneously and provide Internet access to two computers if
your cable provider supplies two IP addresses. Some providers
offer this option for an extra fee. Consult your provider if you are
interested.