User`s manual

10 Zoom Cable Modem User’s Manual
6
66
6 Close any applications that may be open, then remove the CD
from the CD-ROM drive.
7
77
7 Shut down the computer.
Congratulations! You have installed the software. Continue with
the next section, Installing the Hardware—USB Users Only.
Installing the Hardware—USB
Users Only
1
11
1 Shut down the computer that you are going to connect to the
cable modem.
2
22
2 Plug one end of the USB cable into the modem’s USB port
and the other end into your computer’s USB port.
Tip:
The modem has a fold-out base, so you can stand it upright or
lie it flat, depending on your preference.
3
33
3 Connect the modem to the cable outlet.
! If you have a wall outlet cable jack: Connect one end of
the coaxial cable to the modem’s CABLE connector and
connect the other end to the wall jack.
! If you do not have a wall jack: You should have coaxial
cable entering your house close to where you want to
locate your cable modem. Connect the end of this cable to
the modem’s CABLE connector.