Specifications

ZOOM Ultra Fuzz UF-01

Connection Examples With Multi-Effects

This section shows how to use the UF-01 together with multi-effect devices such as the ZOOM

GFX-4 or GFX-8.

In this example, the connection

sequence is UF-01 → multi-effect →

amplifier. Distortion is produced by

the UF-01, and distortion effects of

the multi-effect device are bypassed.

When using the UF-01 with a multi-

effect device that has a send/return loop

such as the ZOOM GFX-8, connect the

UF-01 to the send/return jacks. This

will allow you to switch the UF-01 on

and off using patch programs of the

multi-effect.

RETURN

SEND

■

Using send/return loop of multi-effect

■

Connecting UF-01 before multi-effect device

NOTE

When the UF-01 is connected in the

send/return loop of a multi-effect, turning

up the RESO control may not give the

desired result. (For details, see page 13.)