Specifications

Reference [System]
96 ZOOM PS-04
• NAME
Change the name of the currently loaded project.
The subsequent steps will differ, depending on
which option was selected. See the respective
sections below.
■ Selecting a project
You can select and load a project saved on
SmartMedia card as follows.
H INT
When you turn power to the PS-04 on, the most
recently used project will be automatically
loaded.
1. Refer to “Basic steps for handling
projects” and bring up the indication
“SELECT”. Then press the [ENTER]
key.
2. Turn the dial to select the number of
the project you want to load.
3. Press the [ENTER] key to load the
project.
When the loading process is finished, the AUDIO
mode top screen will be displayed.
■ Creating a new project
You can create a new project on the SmartMedia
card as follows.
1. Refer to “Basic steps for handling
projects” and bring up the indication
“NEW”. Then press the [ENTER] key.
The display changes as follows. From this screen,
you can specify the recording grade (audio track
sound quality).
H INT
The recording grade can only be set for the
entire project.
2. Turn the dial to select one of the
following recording grade settings.
• HF (Hi-Fi)
This setting gives priority to sound quality. A
16MB SmartMedia card provides about 7 minutes
of recording time, converted to a single track.
• LG (Long)
This setting gives priority to recording time. A
16MB SmartMedia card provides about 15 minutes
of recording time, converted to a single track.
3. To create the project, press the
[ENTER] key. To cancel the
operation, press the [EXIT] key.
When you press the [ENTER] key, a new project is
created on the SmartMedia card, and that project is
loaded.
H INT
• The newly created project is automatically
assigned the name “PROJxx” (where xx is the
project number).
• You can change the project name if desired
(→ p. 98).
■ Copying a project
You can copy the contents of the currently loaded
project as follows.
1. Refer to “Basic steps for handling
projects” and bring up the indication
“COPY”. Then press the [ENTER]
key.
The following screen appears.
Project numbe
r
Project name
PROJO1
PROJO1
01
GRADEGRADE
HF
Recording grade