Specifications

Reference [Effects]
92 ZOOM PS-04
2. Repeatedly press one of the cursor
left/right keys to cause the first
character of the patch name to flash.
3. Turn the dial to select a character.
For information on available characters, see page
71.
H INT
You can also use faders 1 - 3 for character
input.
4. Use the cursor left/right keys to
move the flashing position.
5. Repeat steps 3 – 4 to complete the
new name for the patch.
6. When the change is completed,
press the [ENTER] key.
The send/return effect top screen returns. To retain
the entered name, store the patch.
Using the tuner function
The PS-04 incorporates a versatile tuner that can
also accommodate 7-string guitar and other
unconventional tunings. This section explains how
to use the tuner function.
■ Using the chromatic tuner
The chromatic tuner which can automatically detect
pitch in semitone steps operates as follows.
1. Connect the instrument that you
want to tune to the [INPUT] jack, and
make sure that “INPUT” is selected
as input source.
H INT
It is also possible to send the signal from the
built-in mic or the [LINE IN] jack to the tuner. In
this case, change the input source setting
accordingly.
2. From one of the EFFECT mode
screens, press the [TUNER/BYPASS]
key.
Pressing the [TUNER/BYPASS] key in EFFECT
mode bypasses the insert effect and activates the
built-in tuner. When the tuner is activated for the
first time, the indication “CHROMATIC” is shown
for several seconds and the chromatic tuner is
chosen. During tuner operation, the indication
“CR” at the right of the display shows that this
tuner type is selected.
H INT
By pressing the cursor left/right keys
repeatedly, you can switch the tuning type. For
details, see the next section.
3. Play the open string you want to tune.
The pitch is automatically detected, and the display
TIGHT
TIGHT
0
--
--
CR
Currently selected tuner type