Specifications
Reference [Rhythm]
72 ZOOM PS-04
12 . . . . . . . . . Eighth triplet note
16 (default) . . Sixteenth note
24 . . . . . . . . . Sixteenth triplet note
32 . . . . . . . . . Thirty-second note
Hi . . . . . . . . . . 1 tick (1/48 of quarter note)
H
INT
The quantize setting applies to the entire rhythm
section.
Displaying/changing the number
of measures in a pattern
To display or change the number of measures in the
currently selected pattern, proceed as follows. Refer
to “Basic procedure for pattern utility” and bring up
the indication “BARLEN”. When you press the
[ENTER] key, the display changes as follows.
If a blank pattern is selected, you can turn the dial
and change the setting in the range from 1 to 99.
The default setting is 2.
N
OTE
When a "<>" is shown on both sides of the
setting value, the pattern has already been
recorded and the number of measures cannot
be changed.
Displaying/changing the time
signature of a pattern
To display or change the number of beats per
measure in the currently selected pattern, proceed
as follows. Refer to “Basic procedure for pattern
utility” and bring up the indication “TIMSIG”.
When you press the [ENTER] key, the display
changes as follows.
If a blank pattern is selected, you can turn the dial
and change the setting in the range from 1/4 to 8/4.
The default setting is 4/4.
N
OTE
When a “<>” is shown on both sides of the
setting value, the pattern has already been
recorded and the time signature has been set.
In this condition, the value cannot be changed.
Setting the precount
To change the setting of the precount used for real-
time input, proceed as follows. Refer to “Basic
procedure for pattern utility” and bring up the
indication “COUNT”. When you press the
[ENTER] key, the display changes as follows.
By turning the dial, you can select one of the
following precount settings.
• OFF
No precount is heard.
• 1-8
1 – 8 precount beats are heard.
• SP
Use a special precount as described on page 44.
Changing the metronome volume
You can change the volume of the metronome that
is heard when you record a rhythm pattern in real
time. Refer to "Basic procedure of pattern utility" to
select "CLICK VOL" and press the [ENTER] key.
Then turn the dial to adjust the volume (OFF, 1-15).
2
Number of measures in the pattern
4/4
4/4
Time signature of the pattern
4
Precount setting